<< Click to Display Table of Contents >> Navigation: Controlling the Logger > Alarms |
Setting the Alarm parameters is part of the main Logger setup procedure.
To activate an alarm:
1. | Click on Setup DataLogger. |
2. | Type in the desired Alarm parameters for each channel. |
Leaving an alarm parameter blank will mean the alarm is deactivated; there is a button which will allow you to clear all alarms in one step
3. | Select if the display should flash if a channel is in alarm. |
•An Alarm Icon and the Channel number will appear on the screen anyway.
4. | Select if the alarm should persist, ie remain active even if the channel values return to acceptable levels. |
•This will be cleared the next time the device is programmed
5. | Program the Logger |
NOTE: THIS WILL CLEAR THE LOGGER MEMORY